Mist Eliminator
Mist in the flue gas causes various problems, such as loss of material, air pollution, and increase of chemical consumption as neutralizer. Patented B-GON® Mist Eliminator (Demister) is sure to solve all of these problems. More than 99% of collection efficiency can be obtained at 2-3ƒÊm, which is difficult to achieve by traditional knitted-mesh pad.
As seen on the above picture, the Mist Eliminator B-Gon® has been described
as 3-Dimensional trellis and is comprised of plastic monofilaments. Therefore,
most of the fibers are perpendicular to the gas flow, mist separation efficiency
is excellent.
Features ![](image321.gif)
High Corrosion Resistance, High Temperature Resistance |
1. |
Polypropylene up to 82Ž. |
2. |
High Temperature Polypropylene up to 107Ž. |
3. |
KYNAR®(PVDF) up to 112Ž. |
4. |
Teflon® ETFE up to 150Ž. |
5. |
Teflon® PFA up to 204Ž. |
|
|
Light & Flexible |
1. |
Easy to install, can be transported while being fitted to tower in the plant. |
2. |
Simple grid structure. |
|
|
Easy Design of Tower |
1. |
One piece can be made up to 1,800mm-length. |
2. |
Easy to prevent for bypassing. |
3. |
Does not cause damage to the Glass-lining and (Teflon-lining) tower. |
|
|
High Performance |
1. |
Does not cause channeling. |
2. |
Able to collect small mist (0.5 ` 0.7ƒÊm). |
3. |
Very low pressure drop compared with Knitted mesh, chevron, cyclone and candle type. |
4. |
Very high collection efficiency. |
|
|
Easy Maintenance |
|
Able to clean for a short time with high-pressure water hose without removing from the tower. |
|
|
Teflon® is a registered trademark of the Du Pont Company.
KYNAR® is a registered trademark of Pennwalt Corporation. |
Inquiry
|
@@@![](n_image51.gif) |
|
![](image202.gif)
![](image216.gif)
![](image2191R.gif) |